NOTE THIS DOES NOT COME WITH THE WEMOS D1 MINI or CASE BY DEFAULT I have taken the previous design utilising an RJ45 socket and expanded it so that it is now surface mount only and utilises the popular wemos D1 mini.
I am selling Brian Lough's designs under licence, for any support issues please contact ourselves for any questions/issue. What is it? This shield is for easily controlling RGB LED Matrix panels using with a Mini 32 ESP32
I am selling Brian Lough's designs under licence, for any support issues please contact ourselves for any questions/issue. What is it? This shield is a Kit for easily controlling RGB LED Matrix using a Mini 32 ESP32 board
Common Ground DMG gameboy PCB Brilliant quality with a great finish. Extremely useful for modding classic gameboys to work with raspberry pi's or similar. So much easier than trying to re-purpose the old PCB.
I am selling Brian Lough's designs under licence, for any support issues please contact ourselves for any questions/issue. What is it? This kit is a shield for easily controlling RGB LED Matrix using a D1 Mini ESP8266.
15% off
I am selling Brian Lough's designs under licence, for any support issues please contact ourselves for any questions/issue. What is it? An open source shield for the ESP8266 D1 Mini with a ST7789 Colour TFT screen.
15% off
I am selling Brian Lough's designs under licence, for any support issues please contact ourselves for any questions/issue. What is it? This kit is a shield for connecting a Nintendo Wii Nunchuck controller to your D1 Mini.
15% off
I am selling Brian Lough's designs under licence, for any support issues please contact ourselves for any questions/issue. NOTE: This requires additional hardware other than just the ESP32 Dev board.
Only 3 left
15% off
What is it? The Zero Stem is a PCB shim kit designed by Alistair Buxton that turns a Raspberry Pi Zero into a USB dongle. Once the shim is installed, your Raspberry Pi can be plugged directly into a computer or USB hub.
15% off
What is it? This is a basically a pass through device for USB Type A connectors that doesn't connect the 5V line. it has a Male connector and one end and a Female connector at the other.
Pin 27 board makes the installation of a Filament Sensor or a BLTouch fast and easy on the Anet A8. With this custom PCB no soldering is required and with an BLTouch you can enable auto bed levelling easily.
*****BLTouch and S-Melzi board in pictures are for illustration only, they are not included with the Pin 27 Board*** Listing is for one (1) Pin 27 Board only.
This design leverages my existing designs in combination with a custom made cable which gives a plug and play solution. The cable provides communication and power for the device so no external power is required.
15% off
This is a programmer for ESP based boards, it is designed around the standard set by Jon Oxer which allows you to offload a lot of the hardware required for programming to a dedicated board saving costs and space on board designs.
This is similar to my other designs but has a screw terminal for a direct A+B connection from a RS485 device and utilises the popular wemos D1 mini which allows easier flashing and connectivity as it has a usb port built in.
Out of Stock
GENUINE EXCEEDCONN PARTS BRAND NEW - UK STOCK These connectors are required if you are planning to make your own Solis data logger or piggyback device, in which case you may have come across the numerous projects on the internet or perhaps you want to make an extension to get a better Wi-Fi signal for your existing data logger stick. These connectors can also be used to allow you to use one wifi stick on more than one inverter.
15% off
What is it? The Flex-C-Friend is an open source external module for the TS100 soldering iron that allows you to power the Iron from a USB-C Power Delivery PSU, including compatible battery banks. It makes use of XT60 to Barrel jack cables available for the TS100 to provide a very flexible and heat resistant cable to connect to the TS100, as most USB-C cables are not ideal for soldering with.
