Arduino shields, ESP32 boards, 3D printer accessories and IoT adapters — designed and shipped from the UK.
15% off
I am selling Brian Lough's designs under licence, for any support issues please contact ourselves for any questions/issue. What is it? An open source shield for the ESP8266 D1 Mini with a ST7789 Colour TFT screen.
15% off
I am selling Brian Lough's designs under licence, for any support issues please contact ourselves for any questions/issue. What is it? This kit is a shield for connecting a Nintendo Wii Nunchuck controller to your D1 Mini.
15% off
I am selling Brian Lough's designs under licence, for any support issues please contact ourselves for any questions/issue. NOTE: This requires additional hardware other than just the ESP32 Dev board.
Only 3 left
15% off
What is it? The Zero Stem is a PCB shim kit designed by Alistair Buxton that turns a Raspberry Pi Zero into a USB dongle. Once the shim is installed, your Raspberry Pi can be plugged directly into a computer or USB hub.
15% off
What is it? This is a basically a pass through device for USB Type A connectors that doesn't connect the 5V line. it has a Male connector and one end and a Female connector at the other.
15% off
This is a programmer for ESP based boards, it is designed around the standard set by Jon Oxer which allows you to offload a lot of the hardware required for programming to a dedicated board saving costs and space on board designs.
15% off
What is it? The Flex-C-Friend is an open source external module for the TS100 soldering iron that allows you to power the Iron from a USB-C Power Delivery PSU, including compatible battery banks. It makes use of XT60 to Barrel jack cables available for the TS100 to provide a very flexible and heat resistant cable to connect to the TS100, as most USB-C cables are not ideal for soldering with.
